4-ports RS232 TCP IP Fixed UHF RFID Reader

Model No.: QSF4300

Our QSF4300 UHF Fixed reader based on proprietory efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, anti-counterfeit and industrial production process control system.

SEND INQUIRY

You can make an inquiry about this product.
Your e-mail will not be leaked.

PRODUCT DETAIL
Features
Download

Characteristic:

l. Absolute Maximum Rating

ITEM	SYMBOL	VALUE	UNIT
Power Supply	VCC	16	V
Operating Temp.	T_OPR	-10~+55	℃
Storage Temp.	T_STR	-20~+75	℃

l. Electrical and Mechanical Specification

Under T_A=25℃,VCC=+9V unless specified

ITEM	SYMBOL	MIN	TYP	MAX	UNIT
Power Supply	VCC	8	9	12	V
Current Dissipation	I_C		600	1500	mA
Frequency	F_REQ	902		928	MHz
Size	Size		227x170x40		mm

1.Power (DC JACK)

No.	Symbol	Comment
Central	PWR	+9VDC
Outer	GND	Ground

2.GPIO (DB15 Female)

No.	Symbol	Comment
1	Output1	General Output1
2	Output2	General Output2
3	Output3	General Output3
4	Output4	General Output4
5	Output5	General Output5
6	Output6	General Output6
7	Output7	General Output7
8	Output8	General Output8
9	TGIN	Trigger input with internal pull-up to 5V through a 10k resistor
10	R+	R+ of RS485
11	R-	R- of RS485
12	GND	Signal Ground
13	NO	Normal-Open terminal of internal relay
14	NC	Normal-Close terminal of internal relay
15	CM	Common terminal of internal relay

3.Serial communication port RS232 (DB9 Male)

No.	Symbol	Comment
1	nc	Reserved
2	TXD	General Output2
3	RXD	General Output3
4	nc	Reserved
5	GND	Ground
6	nc	Reserved
7	nc	Reserved
8	nc	Reserved
9	nc	Reserved

4.TCPIP network (RJ45)

5.TNC antenna port ANT1~ANT4

6.LED indicator LED1~LED7

No.	Symbol	Comment
1	LED1	Antenna 1 active indicator
2	LED2	Antenna 2 active indicator
3	LED3	Antenna 3 active indicator
4	LED4	Antenna 4 active indicator
5	LED5	Tag-detected indicator
6	LED6	Command-executing indicator
7	LED7	Power-on indicator